You can fix your ooze pen very quickly by yourself by following a few simple steps, and today we will help you to fix your ooze pen charging issues.
Your OOZE Vape Pen has run out of juice, so it’s time to recharge it. To turn the vape pen ON or OFF, you need five clicks, and three clicks on the power button will let you alter the temperature settings. Also, two clicks will start the preheat mode. Each time you press the button on your Ooze pen, it will become green.
If the pen lights up green but the charger lights up red, your pen is dead. Your OOZE pen isn’t charging, though; why? A few of them are listed below. Read the article and figure out why your OOZE pen is not charging.
Why Is Your OOZE Pen Not Charging? Solutions
Here are some reasons why your OOZE pen cannot charge:
Is It On?
Despite how obvious it may seem, make sure your OOZE pen battery is turned on first. If you have an OOZE battery, click the button five times quickly in a span of two seconds without pausing. Pressing the button will turn on your OOZE pen battery and power the atomizer if your battery is on. Nothing will occur when the button is pressed if the battery is not present.
The Twist batteries offer an adjustable voltage, and OOZE batteries also have a preheat mode. The 15-second preheat mode is started by pressing the button twice.
Is Your Connection Perfectly Clean?
Your cartridge may occasionally leak a small amount of oil through the coil and onto the OOZE pen battery connection due to the repeated heating cycles it experiences. Your button may flash as a result of even the tiniest piece of debris interfering with the connection. Thankfully, there is a quick fix!
To turn it off, unscrew the cartridge or charger from the battery and press the button five times. Scrub the OOZE pen battery connection and the cartridge’s base with a cotton swab. You can use a 91% isopropyl alcohol-soaked q-tip or an OOZE Resolution Res Wipe to clean your ooze pen.
It requires some kind of cleaning solution. Use the q-tip to press the wipe against the battery connection while making sure the scrubber side is facing the dirt.
When using alcohol, be sure to let the OOZE pen battery and cartridge fully dry before screwing them back together and turning the machine back on.
This is by far the most typical reason for a battery problem. This issue can be completely resolved by routine battery cleaning. The lifespan of the vaporizer will be significantly extended if you develop the habit of quickly cleaning the OOZE pen battery each time you replace your cartridge.
Is Your Cartridge Coil Making A Connection?
Your coil is a tiny, round piece that is located at the very bottom of your 510-thread battery. Unfortunately, there are times when you’ll get a bad cartridge from the dispensary that won’t work with the heating element of the OOZE pen battery.
Verify that the circular centerpiece is perfectly straight and positioned so that it faces the battery connection. Using a toothpick or bobby pin, if the coil is crooked, gently push it back into place.
The cartridge may become even more damaged if you push too firmly, so take care and pay close attention to what you’re doing.
Is The Battery Damaged?
Do you know if you dropped your OOZE pen battery on land or in water? Unfortunately, if there has been an interference with the internal connections, it could be permanently damaged. A new battery might be necessary if nothing else is working. Learn How to Charge An Ooze Pen Without a Battery.
You Might Also Like:
- Does The Elf Bar Light Up When Charging?
- How To Charge A Dab Pen Without A Proper Charger?
- How To Charge A Vuse Without A Charger?
Tips To Keep Your OOZE Pen Battery
To maintain your OOZE pen, here are some tips for you to follow:
Our very own Smart USB chargers have been created, and once your OOZE pen battery is fully charged, they automatically turn off. When you plug in your dead battery, both your battery and charger lights should come on. Do you know How Long Do Ooze Pens Take to Charge? Read out blog to find the answers.
This is because OOZE chargers preserve the battery cells of the fully charged device rather than continuing to send OOZE pen battery cells into your battery that is already at capacity, which over time shortens the ooze battery life cycle.
All the while the battery is charging, the charger light will be red. The OOZE pen battery light will turn off and the charger light will turn green when the battery has been fully charged.
Make sure not to overtighten when installing a cartridge onto your battery. Connectivity problems could be brought on by a cartridge that is screwed in too firmly. The necessary metal rings for electrical conductivity could be pressed too deeply, preventing them from making contact with one another.
If this occurs, you should be able to gently pry the metal ring up with a paper clip; however, because the ring is only attached by a thin wire, you must be careful not to break it off.
Store At The Proper Temperature
Always keep batteries in room-temperature storage space. Too-high or too-low temperatures can significantly shorten the lifespan of batteries.
Most battery manufacturers provide a warranty, and if you adhere to some simple rules, the manufacturer should be able to replace your product. Maintaining your battery will make sure that the terms and conditions of the warranty will apply and cover the malfunction you’re experiencing.
How To Reset OOZE Battery?
Press the button five times quickly without pausing for two seconds using an OOZE battery. Pressing the button will activate the atomizer once the battery is fully charged and turn on a light that surrounds the button. That’s it. Now, your OOZE pen is reset.
Why Does My OOZE Pen Keep Flashing Green After Charging?
Often the culprit is a bad battery. If the battery is screwed incorrectly, the indicator light will continue to blink green and the battery won’t be able to charge fully. To fix this problem, remove the battery and reattach it, making sure that everything is firmly fastened.
Additionally, there’s a chance that your Ooze battery will be permanently damaged. When it shows that it’s fully charged but the ooze pen isn’t working, it implies that they are actually at zero charges and are unable to hold it.
An indication would be if they appeared to fully charge the battery in a short period of time. With a working battery, that is not feasible.
Conclusion: Charge Your OOZE Pen
It’s simple to reset your Ooze pen if you’re experiencing any problems. You can quickly get back up and running by simply following the below steps. Don’t forget to share this post if it helps you.
How Long Does the OOZE Pen Take to Charge?
The OOze pen battery can be fully charged in 1-2 hours.
How Do You Know When the OOZEe Battery is Charged?
You will notice that the Ooze Smart USB Charger turns red when your vape battery is charging. When the charge is finished, this red color changes to green and the light in the battery light turns off when your pen battery is fully charged.
How Do I Get My Ooze Pen to Charge?
To charge your Ooze Pen battery, grab the USB vape charger that came with your battery and plug it in. You can unplug your battery, screw your cartridge back on, and take a big hit when the red button on the USB charger for your vape pen battery is no longer red.
Why isn’t My Ooze Pen Lighting Up When Charging?
If the light doesn’t come on, the pen may be out of battery and will need to be charged. Once the pen is turned on, lightly press the tip of the pen against a piece of paper to see if any ink comes out. The pen may be clogged and needs to be cleaned if no ink is coming out.
Why is My Ooze Charger Green But Not Charging My Pen?
There are three main reasons your Ooze vapor pen may be blinking green: Your vape battery is dead and needs to be charged. A connection problem exists with your Ooze battery. On the way from the factory to you, your vape pen was harmed.
Why Does My Ooze Pen Blink and Not Hit?
Your battery may be flashing if there is a connection problem, if you are using an incompatible product, or if it needs to be charged.